FILLING YOUR OIL

1. Use your finger to put a slight film of old or new oil onto the rubber gasket of the new oil filter

2. Reinstall new oil filter HAND TIGHTEN ONLY

3. Jack up front end of the truck under the cross member and remove the jack stands

4. Slowly lower front end to the ground

5. Remove dipstick and wipe clean

6. Using a funnel add new oil to the top of the engine

7. Pour in about 4 quarts and then let settle for 5 minutes

8. Reinstall oil cap

10. Check oil with dipstick

11. Add oil as needed usually one more quart will suffice, SEE OWNERS MANUAL

12. Once oil level is in the recommended operating range start the engine and allow to idle for 30 seconds

13. Stop Engine

14. Recheck oil level with the dipstick

15. Add oil if needed at this point

16. Check for leaks

17. Clean up any spillage

18. Let your truck run for 2 minutes

19. Recheck for leaks

20. Pick up all tools and bring oil to a recycling center

21. You have successfully changed the oil in your 2003 Ford F-150